<div dir="ltr">Hello,<div><br></div><div>I have two open-wrt routers running wireguard.</div><div><br></div><div>B1300 wireguard Client and B1300 wireguard server.</div><div><br></div><div>I leave the B1300 wireguard server at the main location and take the B1300 wireguard client to different locations for testing speeds against different ISPs.</div><div><br></div><div>The B1300 wireguard client fails to connect when moved from site to site unless the B1300 wireguard server is rebooted?</div><div><br></div><div>To get the testing I need done for speeds I had to have someone reboot the B1300 wireguard server...once it came up the B1300 wireguard client would connect without any other issues and I did my testing (side note - the speeds tested showed excellent speeds compared to my OpenVPN server back at the main location).</div><div><br></div><div>There must be a configuration parameter that tells the wireguard server to look for a new connection on wg0 interface ...I am guessing that the keep alive timer (set for 25 seconds) locks the wg0 interface up...or not.</div><div><br></div><div>I am hoping for any advice that can help me to fix this issue given I have a long trip coming up in a few weeks and I would prefer wireguard to OpenVPN given it's speed.</div><div><br></div><div>thanks.</div></div>