snapshot 0.0.20170628 broken?
HDA
admin at hda.me
Thu Jun 29 20:02:15 CEST 2017
Just to be sure, you can replace wg-quick for 0.0.20170628 with 0.0.20170613 wg-quick version from https://git.zx2c4.com/WireGuard/tree/src/tools/wg-quick.bash?h=0.0.20170613 and try it out.
On Thu, Jun 29, 2017, at 17:23, Reuben Martin wrote:
> On Thursday, June 29, 2017 11:39:33 AM CDT Jason A. Donenfeld wrote:
> > Hey Reuben,
> >
> > I'm unable to reproduce these results. How sure are you about this
> > situation? Have you tried to reproduce more than once? What are you
> > using to configure the peers?
> >
> > Jason
>
> Yes, I can consistantly reproduce when I move all 3 computers to the
> newer
> snapshot. This is Gentoo system using (gasp) systemd. I configure the
> peers
> using the wg-quick at wg0 service unit. I use a post-up and pre-down in the
> config to setup a vxlan overlayed on top of the VPN connections, but I
> don’t
> think that should matter since this is just using the wg0 interface
> directly. I
> can provide that setup info if you think it might be relevant.
>
> tshark capture of a simple wget from the computer that can’t connect.
>
>
> 5 7.615139647 192.168.100.12 → 192.168.100.1 TCP 60 54134 → 80 [SYN]
> Seq=0 Win=27600 Len=0 MSS=1380 SACK_PERM=1 TSval=3852526353 TSecr=0
> WS=128
> 6 7.684940917 192.168.100.1 → 192.168.100.12 TCP 60 80 → 54134 [SYN,
> ACK] Seq=0 Ack=1 Win=27360 Len=0 MSS=1380 SACK_PERM=1
> TSval=3308550712 TSecr=3852526353 WS=128
> 7 7.684956294 192.168.100.12 → 192.168.100.1 TCP 52 54134 → 80 [ACK]
> Seq=1 Ack=1 Win=27648 Len=0 TSval=3852526423 TSecr=3308550712
> 8 7.685008715 192.168.100.12 → 192.168.100.1 HTTP 202 GET /index.html
> HTTP/1.1
> 9 7.754723388 192.168.100.1 → 192.168.100.12 TCP 52 80 → 54134 [ACK]
> Seq=1 Ack=151 Win=28544 Len=0 TSval=3308550782 TSecr=3852526423
> 10 7.998440304 a6:67:de:b7:51:27 → Spanning-tree-(for-bridges)_00 STP
> 88 Conf. Root = 0/0/8a:46:93:88:40:8b Cost = 0 Port = 0x8003
> 11 9.982462221 a6:67:de:b7:51:27 → Spanning-tree-(for-bridges)_00 STP
> 88 Conf. Root = 0/0/8a:46:93:88:40:8b Cost = 0 Port = 0x8003
> 12 10.321889091 192.168.100.12 → 192.168.100.1 TCP 52 54134 → 80 [FIN,
> ACK] Seq=151 Ack=1 Win=27648 Len=0 TSval=3852529060 TSecr=3308550782
> 13 10.392081110 192.168.100.1 → 192.168.100.12 TCP 52 [TCP Previous
> segment not captured] 80 → 54134 [FIN, ACK] Seq=1010 Ack=152 Win=28544
> Len=0 TSval=3308553420 TSecr=3852529060
> 14 10.392097109 192.168.100.12 → 192.168.100.1 TCP 40 54134 → 80 [RST]
> Seq=152 Win=0 Len=0
>
>
> -Reuben
> _______________________________________________
> WireGuard mailing list
> WireGuard at lists.zx2c4.com
> https://lists.zx2c4.com/mailman/listinfo/wireguard
More information about the WireGuard
mailing list