Cannot ping peer 1 from peer 2
Tim Sedlmeyer
tim at sedlmeyer.org
Fri Mar 16 03:24:00 CET 2018
The ip address for the wg0 interface on peer 2 is set to 10.100.1.2/32
so peer2 has no route to reach 10.100.1.1. You either need to set a
route to 10.100.1.1 on peer 2 or change the address on peer 2 so the
subnet it is in includes 10.100.1.1. For example 10.100.1.2/24.
On Thu, Mar 15, 2018 at 10:07 PM, Vikas <kedia.vikas at gmail.com> wrote:
> Here is the config on peer 1 (Vmware VM running ubuntu 16.04):
> =================================================
>
> vk at ubuntu /g/r/c/w/server> ifconfig ens33
> ens33 Link encap:Ethernet HWaddr 00:0c:29:c8:6c:d5
> inet addr:10.0.1.77 Bcast:10.0.1.255 Mask:255.255.255.0
> inet6 addr: fe80::5b06:24b6:c9e4:954e/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:327949 errors:0 dropped:0 overruns:0 frame:0
> TX packets:87146 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:351155285 (351.1 MB) TX bytes:12179516 (12.1 MB)
>
>
> vk at ubuntu /g/r/c/w/server> more etc-wireguard-wg0.conf
> [Interface]
> Address = 10.100.1.1/24
> ListenPort = 51820
> PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A
> POSTROUTING -o ens33 -j MASQUERADE
> PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D
> POSTROUTING -o ens33 -j MASQUERADE
> PrivateKey = CPQLRq40QGY3+8yn2LlYb1x3zU/3/Ki+A4QjVYgbakY=
> SaveConfig = true
>
> [Peer]
> PublicKey = uL8bs5596DJO7BMnrIVG5btvr4LTzlbx1ovwHe59NBc=
> AllowedIPs = 10.100.1.2/32
>
>
> vk at ubuntu /g/r/c/w/server> ifconfig wg0
> wg0 Link encap:UNSPEC HWaddr
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> inet addr:10.100.1.1 P-t-P:10.100.1.1 Mask:255.255.255.0
> UP POINTOPOINT RUNNING NOARP MTU:1420 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:459 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
>
>
> Here is the config on peer 2 (Vmware VM running ubuntu 18.04):
> ==================================================
>
> root at ubuntu /g/r/c/w/client# ifconfig ens33
> ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet 10.0.1.71 netmask 255.255.255.0 broadcast 10.0.1.255
> inet6 fe80::c4d7:35d6:306b:fc91 prefixlen 64 scopeid 0x20<link>
> ether 00:0c:29:b6:bb:18 txqueuelen 1000 (Ethernet)
> RX packets 532611 bytes 765847699 (765.8 MB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 71767 bytes 5458394 (5.4 MB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
>
> root at ubuntu /g/r/c/w/client# more etc-wireguard-wg0.conf
> [Interface]
> Address = 10.100.1.2
> PrivateKey = AMZXJ1vBx6OOnZlbnYHuShTBAPuOzwCgweG73BS/4WY=
>
> [Peer]
> PublicKey = KNuvytvYu9NktxybaOHsCF11q96IGfc+dT/Dv8L6KB0=
> AllowedIPs = 0.0.0.0/0
> Endpoint = 10.0.1.77:51280
>
>
> root at ubuntu /g/r/c/w/client# ifconfig wg0
> wg0: flags=209<UP,POINTOPOINT,RUNNING,NOARP> mtu 1420
> inet 10.100.1.2 netmask 255.255.255.255 destination 10.100.1.2
> unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> txqueuelen 1000 (UNSPEC)
> RX packets 0 bytes 0 (0.0 B)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 10 bytes 1480 (1.4 KB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
>
> root at ubuntu /g/r/c/w/client# ping 10.0.1.77
> PING 10.0.1.77 (10.0.1.77) 56(84) bytes of data.
> 64 bytes from 10.0.1.77: icmp_seq=1 ttl=64 time=0.464 ms
> 64 bytes from 10.0.1.77: icmp_seq=2 ttl=64 time=0.715 ms
>
>
> root at ubuntu /g/r/c/w/client# ping 10.100.1.1
> PING 10.100.1.1 (10.100.1.1) 56(84) bytes of data.
> ^C
> --- 10.100.1.1 ping statistics ---
> 3 packets transmitted, 0 received, 100% packet loss, time 2033ms
>
>
> What am I doing wrong?
>
> --
> VK
> _______________________________________________
> WireGuard mailing list
> WireGuard at lists.zx2c4.com
> https://lists.zx2c4.com/mailman/listinfo/wireguard
More information about the WireGuard
mailing list