Deploy a wireguard on 2 raspberry pi to connect 2 remote lan - Lan2Lan

[Christopher Bachner]

You have to tell the gateway (router) on each side where to route the IP
range of the other side. Usually you route it over the VPN computer, which
you have to configure to allow routing.

- Chris

On Mon, May 6, 2019, 22:42 Paulo Lopes <plopes1960 at hotmail.com> wrote:

> Hi all!!!
>
> First, let me thank for the amazing vpn protocol that Wireguard is!!!!
>
> I need your advise. As you can see on the picture attach, I have 2
> raspberry pi. One as a vpn server and the other as a vpn client to connect
> 2 remote Lan.
>
> Can you point me what I need to do, if I want to replace the openvpn for
> the wireguard?
>
> I can connect 2 rpi with wireguard, but, the others ip machinies on the
> server and client side can´t see each other.
>
> With openvpn I needed to inser iroute and add a static route on both
> routers. What I need to with the wireguard?
>
> Once again many tahnks for all the help you can give me😉
>
> _______________________________________________
> WireGuard mailing list
> WireGuard at lists.zx2c4.com
> https://lists.zx2c4.com/mailman/listinfo/wireguard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.zx2c4.com/pipermail/wireguard/attachments/20190507/4ca52951/attachment.html>