Source IP selection or multi-home or multi-interface issue - solved with source-based route - was: Re: Wireguard source ip selection issue with multi interfaces

Christoph Loesch wireguard-mail at chil.at
Wed Oct 19 22:56:40 UTC 2022


Now I've read enough (rather old and also pretty recent) posts about that topic and I want to help finally fix this issue.

Not just because it bugs our network too after we optimized/simplified our router-setup but also because it seems over the years many users seem to beaffected. Until now every thread I've read ends with an open question rather than a solution.

In Jason's post here from 2017 I found his script that should reproduce theissue, I tried it and could not reproduce the issue with that script..
https://lists.zx2c4.com/pipermail/wireguard/2017-November/002092.html
To be honest I do not fully understand it to modify it to reproduce the issue in my environment.

Here I posted one example and the (temporary) solution by deleting the route that wireguard had set and re-creating the same route but defining the (correct) IP as src.
https://lists.zx2c4.com/pipermail/wireguard/2021-November/007324.html

How could I help to fix this issue?
If it helps, I could give full access to a test-router which has the same setup as all other routers in our network.

Kind regards


Am 23.11.2021 um 14:52 schrieb Christoph Loesch:
> Hi,
>
> Is this related to my issue with using wrong source ip on outgoing connections?
> (https://lists.zx2c4.com/pipermail/wireguard/2021-November/007307.html)
>
> Which bug would that be? Would be interesting in more detail to understand the issue.
> I'm having a hard time to reproduce (or somehow "fix") the issue I am facing, since this issue is on only 5 devices from over 20 devices where all are configured same.
>
> The configuration or better all routes do not even have any metric defined so I am unsure what to add/remove to change the behaviour.
> Also in my configuration there are multiple interfaces (br0,br1,eth0,eth1,etc..) as it is a router but there are no multiple default routes.
> Comparing perfectly fine working devices to one of those five devices which have this issue I am not able to find a difference in IP-config or routes.
> Even kernel and firmware versions are all same.
>
> The only difference I see is while looking at tcpdump where a simple pingto the wireguard server's internal IP (172.27.0.1/24 in my case) originates with the public IP of the device.
>
> If it is a known bug, it would be nice to know what (and if) I could try to fix and possibly confirm the bug. Or even better beeing able to reproduce the issue.
>
> Thanks and kind regards,
> Christoph
>
> Am 19.11.2021 um 14:10 schrieb 曹煜:
>> Hi,
>> As Jason said in mailing list
>> (https://lists.zx2c4.com/pipermail/wireguard/2017-November/002018.html)
>> years ago, if wireguard reply the client with wrong src ip, then it is
>> a bug. And now I'm trying to set up a minimal configuration.
>>
>> Server info:
>>
>> Ubuntu 20.04 in VMware with two Host-only network adapters:
>>
>> wacke at Ubuntu:/etc$ lsb_release -a
>> No LSB modules are available.
>> Distributor ID: Ubuntu
>> Description: Ubuntu 20.04.3 LTS
>> Release: 20.04
>> Codename: focal
>>
>> wacke at Ubuntu:/etc$ uname -a
>> Linux Ubuntu 5.14.8-051408-generic #202109280455 SMP Tue Sep 28
>> 04:57:31 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>>
>> wacke at Ubuntu:/etc$ sudo ip route show
>> 169.254.0.0/16 dev ens33 scope link metric 1000
>> 172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown
>> 192.168.187.0/24 dev ens33 proto kernel scope link src 192.168.187.129
>> metric 100
>> 192.168.187.0/24 dev ens35 proto kernel scope link src 192.168.187.128
>> metric 101
>> 192.168.199.0/24 dev wg0 proto kernel scope link src 192.168.199.1
>>
>> wacke at Ubuntu:/etc$ sudo cat /etc/wireguard/wg0.conf
>> [Interface]
>> PrivateKey = oLLeTlvwWsfGoyQpDwZo0k7AsMf0LkkfycGPwFjamEA=
>> ListenPort = 5999
>>
>> [Peer]
>> PublicKey = JYvK2/FBbbSrDbkH29ejWejkBJS3ch/SFtyZwNf5O1c=
>> AllowedIPs = 192.168.199.2/32
>> PersistentKeepalive = 25
>>
>> [Peer]
>> PublicKey = keIPXZFgvB79biV74kGc5R9vAHpzyVyQHci8KBSDIUw=
>> AllowedIPs = 192.168.199.3/32
>> PersistentKeepalive = 25
>>
>> wacke at Ubuntu:/etc$ sudo wg setconf wg0 /etc/wireguard/wg0.conf
>> wacke at Ubuntu:/etc$ sudo ip address add dev wg0 192.168.199.1/24
>> wacke at Ubuntu:/etc$ sudo ip link set up dev wg0
>> wacke at Ubuntu:/etc$ sudo wg show
>> interface: wg0
>>     public key: Vkdx0MhQkc9anLaUehR/Df1zuKjxceflxMCAeAaCWCo=
>>     private key: (hidden)
>>     listening port: 5999
>>
>> peer: JYvK2/FBbbSrDbkH29ejWejkBJS3ch/SFtyZwNf5O1c=
>>     endpoint: 192.168.187.1:35560
>>     allowed ips: 192.168.199.2/32
>>     transfer: 2.89 KiB received, 1.80 KiB sent
>>     persistent keepalive: every 25 seconds
>>
>> peer: keIPXZFgvB79biV74kGc5R9vAHpzyVyQHci8KBSDIUw=
>>     allowed ips: 192.168.199.3/32
>>     persistent keepalive: every 25 seconds
>>
>> Client info:
>>
>> HOME-Server:/NAS/Software/Software # uname -a
>> Linux HOME-Server 5.14.14-2-default #1 SMP Thu Oct 21 05:05:03 UTC
>> 2021 (2b5383f) x86_64 x86_64 x86_64 GNU/Linux
>>
>> HOME-Server:/NAS/Software/Software # cat wg0.conf
>> [Interface]
>> PrivateKey = 4Pw1cetxd9TdfH3TSab+9UcRBlHwZ1o/vmrUgkerZls=
>>
>> [Peer]
>> PublicKey = Vkdx0MhQkc9anLaUehR/Df1zuKjxceflxMCAeAaCWCo=
>> Endpoint = 192.168.187.128:5999
>> AllowedIPs = 192.168.199.0/24
>> PersistentKeepalive = 25
>>
>> HOME-Server:/NAS/Software/Software # ip link add wg0 type wireguard
>> HOME-Server:/NAS/Software/Software # ip address add dev wg0 192.168.199.2/24
>> HOME-Server:/NAS/Software/Software # wg setconf wg0 wg0.conf
>> HOME-Server:/NAS/Software/Software # ip link set wg0 up
>> HOME-Server:/NAS/Software/Software # wg show
>> interface: wg0
>>     public key: JYvK2/FBbbSrDbkH29ejWejkBJS3ch/SFtyZwNf5O1c=
>>     private key: (hidden)
>>     listening port: 53058
>>
>> peer: Vkdx0MhQkc9anLaUehR/Df1zuKjxceflxMCAeAaCWCo=
>>     endpoint: 192.168.187.128:5999
>>     allowed ips: 192.168.199.0/24
>>     transfer: 0 B received, 59.26 KiB sent
>>     persistent keepalive: every 25 seconds
>>
>>
>> tcpdump of client side:
>>
>> HOME-Server:/NAS/Software/Software # tcpdump -i any -vn "(dst port 5999)"
>> tcpdump: data link type LINUX_SLL2
>> tcpdump: listening on any, link-type LINUX_SLL2 (Linux cooked v2),
>> snapshot length 262144 bytes
>> 22:10:37.794301 vmnet1 Out IP (tos 0x88, ttl 64, id 54724, offset 0,
>> flags [none], proto UDP (17), length 176)
>>       192.168.187.1.53058 > 192.168.187.128.5999: UDP, length 148
>> 22:10:43.170306 vmnet1 Out IP (tos 0x88, ttl 64, id 55327, offset 0,
>> flags [none], proto UDP (17), length 176)
>>       192.168.187.1.53058 > 192.168.187.128.5999: UDP, length 148
>> 22:10:48.546281 vmnet1 Out IP (tos 0x88, ttl 64, id 56142, offset 0,
>> flags [none], proto UDP (17), length 176)
>>       192.168.187.1.53058 > 192.168.187.128.5999: UDP, length 148
>> 22:10:53.670343 vmnet1 Out IP (tos 0x88, ttl 64, id 57053, offset 0,
>> flags [none], proto UDP (17), length 176)
>>       192.168.187.1.53058 > 192.168.187.128.5999: UDP, length 148
>> 22:11:18.754308 vmnet1 Out IP (tos 0x88, ttl 64, id 58505, offset 0,
>> flags [none], proto UDP (17), length 176)
>>       192.168.187.1.53058 > 192.168.187.128.5999: UDP, length 148
>> 22:11:24.130286 vmnet1 Out IP (tos 0x88, ttl 64, id 58621, offset 0,
>> flags [none], proto UDP (17), length 176)
>>       192.168.187.1.53058 > 192.168.187.128.5999: UDP, length 148
>> 22:11:29.506305 vmnet1 Out IP (tos 0x88, ttl 64, id 58810, offset 0,
>> flags [none], proto UDP (17), length 176)
>>       192.168.187.1.53058 > 192.168.187.128.5999: UDP, length 148
>> 22:11:34.882326 vmnet1 Out IP (tos 0x88, ttl 64, id 59444, offset 0,
>> flags [none], proto UDP (17), length 176)
>>       192.168.187.1.53058 > 192.168.187.128.5999: UDP, length 148
>> ^C
>> 8 packets captured
>> 8 packets received by filter
>> 0 packets dropped by kernel
>>
>> tcpdump of server side:
>>
>> wacke at Ubuntu:~$ sudo tcpdump -i any -vn "(src port 5999)"
>> tcpdump: listening on any, link-type LINUX_SLL (Linux cooked v1),
>> capture size 262144 bytes
>> 22:10:11.754862 IP (tos 0x88, ttl 64, id 22024, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:10:16.874400 IP (tos 0x88, ttl 64, id 22399, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:10:21.994433 IP (tos 0x88, ttl 64, id 23057, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:10:27.370558 IP (tos 0x88, ttl 64, id 23912, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:10:32.494605 IP (tos 0x88, ttl 64, id 24944, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:10:37.610779 IP (tos 0x88, ttl 64, id 25327, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:10:42.986834 IP (tos 0x88, ttl 64, id 25498, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:10:48.362908 IP (tos 0x88, ttl 64, id 26521, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:10:53.486942 IP (tos 0x88, ttl 64, id 27214, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:11:18.571437 IP (tos 0x88, ttl 64, id 31112, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:11:23.947460 IP (tos 0x88, ttl 64, id 31897, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:11:29.323608 IP (tos 0x88, ttl 64, id 32715, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> 22:11:34.699676 IP (tos 0x88, ttl 64, id 33840, offset 0, flags
>> [none], proto UDP (17), length 120)
>>       192.168.187.129.5999 > 192.168.187.1.53058: UDP, length 92
>> ^C
>> 13 packets captured
>> 13 packets received by filter
>> 0 packets dropped by kernel
>>
>> As the tcpdump log showed, the wireguard server always chose the ip
>> with lowest metric as source ip (192.168.187.129) to reply to the
>> client (while the client tried to connect 192.168.187.128).
>>
>> Hope the info above can help to debug. Many thanks.


More information about the WireGuard mailing list