How to post to the mailling list? (Was: IP which is not there but wg0 replies - ?)

lejeczek peljasz at yahoo.co.uk
Thu Jun 8 11:45:27 UTC 2023



On 08/06/2023 11:47, Marek Küthe wrote:
> Hello,
>
> I would be interested to know how you managed to post something on the
> Mailling list? I have been trying to do this for several weeks, however
> my messages do not arrive. Do you have a special trick?
>
> I would appreciate an answer!
>
> Greetings
> Marek Küthe
>
> On Thu, 8 Jun 2023 11:30:26 +0200
> lejeczek <peljasz at yahoo.co.uk> wrote:
>
>> Hi guys.
>>
>> Purely accidentally I stumbled uppon:
>>
>> -> $ ping 10.1.101
>> PING 10.1.101 (10.1.0.101) 56(84) bytes of data.
>> 64 bytes from 10.1.0.101: icmp_seq=1 ttl=64 time=0.148 ms
>> 64 bytes from 10.1.0.101: icmp_seq=2 ttl=64 time=0.415 ms
>>
>> -> $ ip a ls dev wg0
>> 17: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 8920 qdisc
>> noqueue state UNKNOWN group default qlen 1000
>>       link/none
>>       inet 10.1.0.99/24 scope global wg0
>>          valid_lft forever preferred_lft forever
>> peer:
>> 14: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 8920 qdisc
>> noqueue state UNKNOWN group default qlen 1000
>>       link/none
>>       inet 10.1.0.100/24 scope global wg0
>>          valid_lft forever preferred_lft forever
>>
>> This a wg0's IP.
>> Someone could shed a bit more light on that - I'd imagine
>> many will appreciate, I will.
>> I'm thinking - is my ipcalcing messed up..
>> many thanks, L.
>>
>
Apparently the list (maintainers?) practice old & healthy 
habit - which placing replies below/at bottom also is -  to 
accept only "text" format for a message. (I presume for new 
message/thread)
Test that if you will. (Thunderbird works)
regards, L.


More information about the WireGuard mailing list