TX counters not updated on wireguard interface
Baptiste Jonglez
baptiste at bitsofnetworks.org
Sat May 13 09:08:43 CEST 2017
Hi,
While trying 0.0.20170421-2 on Debian jessie, I noticed that the TX
counters are not updated:
$ ip -s link show
7: wg: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/none
RX: bytes packets errors dropped overrun mcast
4384059324 4073303 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
This is after a bidirectional TCP iperf, so they has been some trafic in
both directions. Bandwidth monitors like bmon also don't show any
outgoing trafic.
Baptiste
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.zx2c4.com/pipermail/wireguard/attachments/20170513/60bf8c34/attachment.asc>
More information about the WireGuard
mailing list