wg-quick: syntax error, unexpected saddr

[Edward Vielmetti]

Eddie - what version of nftables does Slackware come with? The output of
`nft -v` should be helpful.

There is a report from stackexchange that nftables at 0.7 gives this error,
but at 0.8.1 or better it's OK. I was not easily able to verify that from
the source code, but it would be where I'd start to look. There was

The nftables 0.8.1 release notes (from 2018) are here:
https://lwn.net/Articles/744480/ and it points to new syntax in this
release.

good luck!

Ed

On Thu, Jan 2, 2020 at 12:27 AM Eddie <stunnel at attglobal.net> wrote:

> First time running wireguard as a native client on my Slackware 14.2
> system throws this:
>
> root at The-Tardis:~# wg-quick up wg0
> [#] ip link add wg0 type wireguard
> [#] wg setconf wg0 /dev/fd/63
> [#] ip -4 address add 192.168.150.14/32 dev wg0
> [#] ip link set mtu 1420 up dev wg0
> [#] wg set wg0 fwmark 51820
> [#] ip -4 route add 0.0.0.0/0 dev wg0 table 51820
> [#] ip -4 rule add not fwmark 51820 table 51820
> [#] ip -4 rule add table main suppress_prefixlength 0
> [#] sysctl -q net.ipv4.conf.all.src_valid_mark=1
> [#] nft -f /dev/fd/63
> /dev/fd/63:5:76-80: Error: syntax error, unexpected saddr
>
> Fairly simple config to connect to my VPS:
>
> [Interface]
> Address = 192.168.150.14/32
> PrivateKey = <Not the key you're looking for>
>
> [Peer]
> PublicKey = <Just being overly paranoid>
> Endpoint = www.xxx.yyy.zzz:51820
> AllowedIPs = 0.0.0.0/0
>
> Not sure what additional information you need collected at this point.
>
> I'm able to connect outbound successfully using NordVPN's version of
> wireguard, but that doesn't use wg-quick, which is where the issue is.
>
> Cheers.
> _______________________________________________
> WireGuard mailing list
> WireGuard at lists.zx2c4.com
> https://lists.zx2c4.com/mailman/listinfo/wireguard
>


-- 
Edward Vielmetti +1 734 330 2465
edward.vielmetti at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.zx2c4.com/pipermail/wireguard/attachments/20200102/d0b4b1b4/attachment.html>